Amino molding powder urea molding compound,

GENERAL CHARACTERISTICS.  JOSEN Amino Moulding Powders are based on colourless thermosetting resins which are condensation products of either urea or melamine with formaldehyde. These resins are combined with high purity alpha cellulose filler, pigments, catalyst and other additives to give the range of materials descr

Featured Products

GENERAL CHARACTERISTICS. 
 
JOSEN Amino Moulding Powders are based on colourless thermosetting resins which are condensation products of either urea or melamine with formaldehyde. These resins are combined with high purity alpha cellulose filler, pigments, catalyst and other additives to give the range of materials described in our Technical Brochure.
JOSEN materials conform to internationally recognised standards. ( DIN 7708 Type 131.5 / ISO 2112/BS1322 - UFA10 /  UL94 )
 
 
STABILITY
A storage of at least 6  months can be expected when stored in cool and dry conditions between 5'C and 20'C. A prolonged storage at higher temperatures will reduce the storage life of the material.

 
PRODUCT NAME: UREA MOULDING COMPOUND,
TYPE: UF1G-A-2007
 Grade: Compression grade






PropertiesUF1G-A-2007
UnitTest ResultStandard
1Inflect strength( Unnotched)kJ/m27.52ISO179-1:2000
2Inflect strength( Notched)kJ/m21.68ISO179-1:2001
3Heat distortion temperature°C123ISO75-2:2003
4Densityg/cm31.48ISO1183-1:2004
5Shrinkage%0.74ISO2577:2007
6Post Shrinkage(80°C+/-2°C/48h)%0.54ISO2577:2007
7Dielectric StrengthMV/m13.7IEC60243-1:1998
8Insulation resistance,(after 24h in water)Ω2.7x10**12IEC60167:1964
9Proof Tracking Index
PTI600-0.52IEC60112:1979
10Glow Wire 960°C, 180sec.RatingBH2-10IEC60700:1981
11Oxgen Index%31.5ISO4589:1984
12FlammabilityRatingV-0IEC60695-11-10:2003







 

PRODUCT NAME: UREA MOULDING COMPOUND,
TYPE: UF1G-C-1210Z
 Grade: Injection grade






PropertiesUF1G-C-1210Z
UnitTest ResultStandard
1Inflect strength( Unnotched)kJ/m26.51ISO179-1:2000
2Inflect strength( Notched)kJ/m21.70ISO179-1:2001
3Heat distortion temperature°C130ISO75-2:2003
4Densityg/cm31.5ISO1183-1:2004
5Shrinkage%0.78ISO2577:2007
6Post Shrinkage(80°C+/-2°C/48h)%0.37ISO2577:2008
7Dielectric StrengthMV/m12.9IEC60243-1:1998
8Insulation resistance,(after 24h in water)Ω7.2x10**12IEC60167:1964
9Proof Tracking Index
PTI600-0.61IEC60112:1979
10Glow Wire 960°C, 180sec.RatingBH2-7IEC60707:1981
11Oxgen Index%33.3ISO4589:1984
12FlammabilityRatingV-0IEC60695-11-10:2003
 
Amino Moulding Powder Urea Moulding Compound,

Amino Moulding Powder Urea Moulding Compound,
Amino Moulding Powder Urea Moulding Compound,


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours